★★ ★★★★★★★★ Important Notes: ★★★★★★★★★★★ ★
- Uninstall WinPwn 1.0 first if you have it installed (WinPwn 1.0 uninstall 해야함 이전 버전은 다 삭제 하시고 WinPwn 2.0.0.2버전만 설치 하셔야 됨)
- Make sure you have iTunes 7.7 installed(iTunes 7.7 설치가 되어 있어야함)
After you install WinPwn, plug in your iPod/iPhone and launch WinPwn 2.0.0.1
Step 1: Click Browse .ipsw(browse.ipsw를 클릭하세요)
Step 2: Select your 2.0 firmware and click open(2.0펌웨어를 선택하시고 열기를 누르세요)
Step 3: Click IPSW Builder(IPSW Builder를 클릭하세요)
Step 5: Select Install
Cydia and YouTube activation fix(Instal Cydia와 Youtube activation fix를 체크하세요.)
<<<<<아이폰유저들만 하시는 부분>>>>>>
5b: iPhone only, select settings under Advanced
for your iPhone(아이폰만하세요, Advanced아래에 있는 세팅을 선택하세요.)
Click on the Bootloader 3.9 file button and select bl39.bin file and then click the Bootloader 4.6 file button and select the bl46.bin file(Bootloader 3.9 file버튼을 누르시고 bl39.bin파일을 선택하세요. 그 다음 bootloader 4.6file 버튼을 누르신 다음에 bl4.6을 선택하세요.)
Note: cmw had said it did not
matter either way if you selected No Wipe, I decided to
though.
<<<여기 까지는 아이폰 부분입니다>>>>>
Step 6:Click Custom Images tab, and select “Use Custom Pictures”( Custom Images 탭을 선택하시고, Use custom pictures를 선택하세요.
You can click on
Boot Logo and Restore logo to select images you have on
your computer (go here for some logos). Or you can
search online for some.
Step 7: Click Build .ipsw and choose were you want to save the custom firmware to.(build .ipsw를 클릭하신후 어디 저장할지 선택하세요.)
It will start to build the firmware at this point
Once
its done click ok
Step 8: Click on iPwner(iPwner를 선택하세요.)
Now select the custom firmware you created
It will kill iTunes once done. Now click ok
Step 9: Now open iTunes and put your iPod/iPhone into DFU (itunes를 키신 후 iPod touch또는 iPhone을 dfu모드에 너세요.)(not sure how click here to see how and remember that your iPod/iPhone will be black like its off when in DFU mode)
Step 10: Hold Shift key and click restore then select your
custome firmware you built. (쉬프트 키와 복구 키를 같이 누른다음 님이
만든 커스텀 펌웨어를 선택하세요.)
아이팟 터치 유저 팬 카페의 오데
님의 강좌 참조 하였습니다.
